Standard Drawer Over Door

Base Cabinet – 3 Door/3 Drawer

Cabinet Code

Sizes

Width: 48in. to 72in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height. (i.e. B6034.5 for a 60in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 3 drawers, over 3 doors. (Note: middle door/drawer are 1/2in. overlay (left to right) and the door will use a 1/2in. overlay hinge).

Butt Door Base Cabinet

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height +BD. (i.e. B3034.5BD for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Standard Base cabinet, with Butt Doors, and 1 drawer. (Note: when height is changed from the standard 34.5in. H, the drawer opening remains fixed at 5in. H).

Butt Door Base Cabinet w/2 Drawers

Cabinet Code

Sizes

Width: 30in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height + BD2D. (i.e. B3034.5BD2D for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Standard Base cabinet, with Butt Doors, and 2 drawers separated by an upright center divider. (Note: when height is changed from standard 34.5in. H, the drawer opening remains fixed at 5in. H). IMPORTANT NOTE: Drawer fronts will not align with doors on full overlay applications (drawer fronts will have a 1/2in. gap while doors will butt together, meaning doors will be wider than drawer fronts).

Double Door Base Cabinet with Single Drawer

Cabinet Code

Sizes

Width: Standard is 27in. W. (Note: Available from 27in. to 36in. in 1/16in. increments, as custom: CSB2D1D cabinet).
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height. (i.e. B3634.5 for a 36in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Standard Base cabinet, with double doors, upright center divider, and 1 drawer. (Note: when height is changed from standard 34.5in. H, the drawer opening remains fixed at 5in. H).

Double Door /Drawer Base Cabinet

Cabinet Code

Sizes

Width: 30in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height. (i.e. B4234.5 for a 42in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Standard Base cabinet, with double doors, upright center divider, and 2 drawers. (Note: when height is changed from standard 34.5in. H, the drawer opening remains fixed at 5in. H).

Single Door Base Cabinet

Cabinet Code

Sizes

Width: 12in. to 24in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B + width + height. (i.e. B1834.5 for an 18in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Standard Base cabinet, with a single door, and 1 drawer. (Note: when height is changed from standard 34.5in. H, the drawer opening remains fixed at 5in. H).


Corner Base

Base Cabinet – Corner Pie Cut

Cabinet Code

Sizes

Width: 33in. to 42in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BLS + Left leg width + Right leg width + height. (i.e. BLS333634.5 for a 33in. W Left leg x 36in. W Right leg x 34.5in. H cabinet).

Description

Corner, pie cut, lazy susan cabinet. (Note: Susans are NOT included, but may be added to this cabinet – See interior storage options). A soss hinge is included for joining the doors together. (Note: some door designs do not allow for soss hinge borings. In those cases, customers will need to source their own solution for joining the doors. We recommend a Salice hinge, available at www.rockler.com, for joining the doors). Please note that the depth remains 24in. even as the size changes. The pie cut area is what gets larger/smaller. Also, please note the minimum clearance width, in halls and doorways, to accommodate a BLS36 is 35in. W.

Base Corner – Diagonal, Full Door

Cabinet Code

Sizes

Width: 36in. Only
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BCFD + width + height. (i.e. BCFD3634.5 for a 36in. W x 36in. W x 34.5in. H cabinet).

Description

Diagonal, full door, corner cabinet. (Note: Susans are NOT included, but may be added to this cabinet – See interior storage options). Also please note, the minimum clearance width, in halls and doorways, to accommodate this cabinet is 35in. W.

Base Sink Corner Cabinet

Cabinet Code

Sizes

Width: 36in. Only
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BSC + width + height. (i.e. BSC3634.5 for a 36in. W x 36in. W x 34.5in. H cabinet).

Description

Diagonal corner cabinet, with door, false drawer front, and NO shelf. Please note, the minimum clearance width, in halls and doorways, to accommodate this cabinet is 35in. W.

Base Blind Corner Cabinet

Cabinet Code

Sizes

Width: 36in., 39in., 42in., 45in., and 48in. Only
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BBC + width + height. (i.e. BBC3634.5 for a 36in. W x 34.5in. H cabinet).

Description

Base blind corner, with drawer and door(s). (IMPORTANT NOTE: These are symmetrical units that can be used in left or right hand applications, which results in the cabinet being ‘pulled’ from the corner in certain sizes. This creates a void in the corner. Therefore, it is CRITICAL that you review the downloadable cabinet catalog to see specifics on the blind corner cabinets (blind area, operable area, minimum clearances, etc). It is the customer’s responsibility to educate themselves on this cabinet and ask questions! Misunderstanding this cabinet, how it is sized/installed or how its use affects the performance of the doors and drawers in the corner area is not grounds for a replacement! For custom applications or where the ‘void’ in the corner created by the symmetrical Susan is not desired, we can do a custom BBC using a custom face frame. Please contact us for details.


Angled/End of Run

Base Angle End Cabinet

Cabinet Code

Sizes

Width: 24in. Only
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BAE + width + height. (i.e. BAE2434.5  for a 24in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Double angle cabinet, intended to act as end of run cabinet, to soften hard edges. Perfect near doorways by allowing cleaner ingress/egress.

Base End Angle Left/Right Cabinet

Cabinet Code

Sizes

Width: 12in. Only
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BAEL or R + width + height. (i.e. BAEL2434.5  for a left angled, 24in. W x 34.5in. H cabinet).

Description

Angle cabinet, intended to act as end of run cabinet, to soften hard edges. Perfect near doorways by allowing cleaner ingress/egress.


Double Entry (2 Sided)

Base Double Entry Cabinet w/Butt Doors, Single Drawer

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BDE + width + height +BD. (i.e. BDE3034.5BD  for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction. (Note: when ordering 24in. W version, a single door option is available, thus please specify as special instruction).

Description

Base cabinet, with Butt doors, which is accessible from both sides. Single drawer, which is accessible from one side only, other drawer front is false. (Note: when height is changed from standard 34.5in. H, drawer height remains fixed at 5in. H).

Case Double Entry, Double Door Doors and Drawers

Cabinet Code

Sizes

Width: 30in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BDE + width + height. (i.e. BDE4234.5  for a 42in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction. (Note: when ordering 24in. W version, a single door option is available, thus please specify as special instruction).

Description

Base cabinet, with double doors/upright center divider, accessible from both sides. Two drawers, which are accessible from one side only, other drawer fronts are false. (Note: when height is changed from standard 34.5in. H, drawer height remains fixed at 5in. H).

Base Door/Drawer Combination, Butt Doors Left or Right

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BC3DL or R + width + height + BD. (i.e. BC3DR3034.5BD  for a rightversion, 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with combination drawers above, and Butt doors below. Please note, left version has the large drawer to the left, while right version has the large drawer to right (as pictured). (Note: when height is changed from standard 34.5in. H, only lower door area height changes. Drawer openings remain fixed at 5in. H and 11.5in. H respectively).


Full Door

Base Full Cabinet w/Single Door

Cabinet Code

Sizes

Width: 9in. to 24in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BFD + width + height. (i.e. BFD0934.5 for a 9in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with a full single door, and no drawer. The 9in. W version is ideal for a tray base application. (Note: all cabinets include 2 shelves, EXCEPT the 9in. W cabinet, which doesn’t include any shelves).

Base Full Door Cabinet w/Butt Doors

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BFD + width + height + BD. (i.e. BFD3034.5BD for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with full Butt doors, and no drawer.

Base Full Door Cabinet w/ Double Doors

Cabinet Code

Sizes

Width: 27in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BFD + width + height. (i.e. BFD3034.5 for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with full double doors, upright center divider, and no drawer.


Drawer/Door Combination

Base Door/Drawer Combination Cabinet w/Double Doors Left or Right

Cabinet Code

Sizes

Width: 27in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BC3DL or R + width + height. (i.e. BC3DR3034.5  for a right version, 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with combination drawers above, and double doors with center divider below. Please note, left version has the large drawer to the left, while rightversion has the large drawer to right (as pictured). (Note: when height is changed from standard 34.5in. H, only lower door area height changes. Drawer openings remain fixed at 5in. H and 11.5in. H respectively).

Base Door/Drawer Combination Cabinet w/4 Drawers

Cabinet Code

Sizes

Width: 36in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BC4D + width + height. (i.e. BC4D3634.5  for a 36in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with combination drawers above, and double doors/upright center divider below. (Note: when height is changed from standard 34.5in. H, only lower door area height changes. Drawer openings remain fixed at 5in. H and 11.5in. H respectively. When width changes, drawer opening widths are equal).

Base Under Counter Microwave Cabinet

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BUCM + width + height. (i.e. BUCM3034.5  for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with set in place Microwave (MW) opening above the drawer. (Note: for a standard 34.5in. H cabinet, the top MW opening height is 15.75in. H. As cabinet height changes, upper MW opening height changes. Lower drawer opening height fixed at 10.25in. H). If you desire the upper MW opening to have the same interior (finish, species, etc) as the exterior of the cabinet, then specify the Matching Interior Option.


Drawer Base

Base 4 Drawer w/ Split Top Drawers Equal Height Bottom Drawers

Cabinet Code

Sizes

Width: 30in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B4D2S2EH + width + height. (i.e. B4D2S2EH3634.5 for a 36in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 4 drawers. Bottom 2 drawers are equal height (9.75in. H openings on standard 34.5in. H cabinet). Top 2 drawers are equal width. (Note: when height is changed from standard 34.5in. H, only the lower openings height changes. Upper drawer openings remain fixed at 5in. H).

Base 3 Drawer – Equal Height Bottom Drawers

Cabinet Code

Sizes

Width: 12in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B3DEH + width + height. (i.e. B3DEH2434.5 for a 24in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 3 drawers. Bottom 2 drawers are equal height (9.75in. H openings on standard 34.5in. H cabinet). (Note: when height is changed from standard 34.5in. H, only the lower openings height changes. Upper drawer opening remains fixed at 5in. H).

Drawer Base – Double Drawer w/Divider

Cabinet Code

Sizes

Width: 30in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B1DCS + width + height. (i.e. B1DCS4221 for a 42in. W x 21in. H cabinet). If depth other than standard 24in. D, or height other than standard 21in.H is required, then note as special instruction.

Description

Base cabinet, with 2 drawers.

Drawer Base – Single Drawer

Cabinet Code

Sizes

Width: 12in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B1D + width + height. (i.e. B1D2421 for a 24in. W x 21in. H cabinet). If depth other than standard 24in. D, or height other than standard 21in. H, is required, then note as special instruction.

Description

Base cabinet, with 1 drawer.

Base Cabinet – 2 Drawer

Cabinet Code

Sizes

Width: 12in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B2D + width + height. (i.e. B2D2434.5 for a 24in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 2 equal height drawers. (Note: when height is changed from standard 34.5in. H, the drawer openings remain equal).

Base Cabinet – 3 Drawer

Cabinet Code

Sizes

Width: 12in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B3D + width + height. (i.e. B3D2434.5 for a 24in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 3 drawers. (Note: when height is changed from standard 34.5in., only the lower opening height changes. Upper two opening heights remain fixed at 5in. H and 8in. H respectively).

Base Cabinet – 4 Drawers

Cabinet Code

Sizes

Width: 12in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate B3D + width + height. (i.e. B3D2434.5 for a 24in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with 4 drawers. (Note: when height is changed from standard 34.5in. H, only lower opening height changes. Upper three opening heights remain fixed at 5in. H).


Appliance

Base Built-In Under-Counter Microwave Cabinet

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BIUCM + width + height. (i.e. BIUCM3034.5  for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with built-in Microwave (MW) opening above the drawer. (Note: for a standard 34.5in. H cabinet, the top MW opening height is 13in. H, and the MW opening width is 6in. less than cabinet width. As cabinet height changes, upper MW opening height changes. MW opening can be field trimmed 5in. in height and 3in. in width. Lower drawer opening height fixed at 8in. H).

Base Range Cabinet w/Three Drawers

Cabinet Code

Sizes

Width: 30in. to 39in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BR3D + width + height. (i.e. BR3D3034.5  for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with false top drawer, and 2 operable lower drawers. (Note: as cabinet height changes, only lower opening height changes. Top and middle openings fixed at 5in. H and 8in. H respectively).

Base Range Cooktop Cabient

Cabinet Code

Sizes

Width: 30in. to 42in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BCT + width + height. (i.e. BCT3034.5  for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with Butt doors above a single drawer. (Note: when height is changed from standard 34.5in. H, only the top opening changes. Drawer opening height fixed at 11.5in. H).


Sink

Sink Base Cabinet w/Butt Doors

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BS + width + height + BD. (i.e. BS3034.5BD for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with Butt doors, false drawer front, and no shelf.

Sink Base Cabinet w/ Double Doors Single Drawer

Cabinet Code

Sizes

Width: 27in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BS + width + height. (i.e. BS3034.5 for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with double doors, upright center divider, false drawer front, and no shelf.

Sink Base Cabinet w/ Double Doors

Cabinet Code

Sizes

Width: 30in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BS + width + height. (i.e. BS4234.5 for a 42in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Base cabinet, with double doors, upright center divider, 2 false drawer fronts, and no shelf.

Farm Sink Cabinet w/Butt Doors

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate ASB + width + height +BD. (i.e. ASB3034.5BD for a 30in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Apron (farm sink) Base cabinet, with Butt doors, and no shelf. (Note: factory sink bowl opening is 5in. H by 6in. less than the cabinet’s width). The sink opening is meant to be field trimmable to meet your sink’s cut out spec. (Note: custom sink cut outs are NOT available from the factory. They MUST be field cut by the installer)! The sink opening is trimmable 4.5in. in height and 3in. in width. (Note: when height is changed from standard 34.5in. H, the lower door opening section changes). To accommodate a sink that will not work with these cut out limits, please contact us for a quote on a custom face frame. (IMPORTANT NOTE: sink supports are NOT included with this cabinet)!

Farm Sink Cabinet w/Double Doors

Cabinet Code

Sizes

Width: 24in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate ASB + width + height. (i.e. ASB4234.5BD for a 42in. W x 34.5in. H cabinet). If depth other than standard 24in. is required, note as special instruction.

Description

Apron (farm sink) Base cabinet, with  double doors, upright center divider, and no shelf. (Note: sink bowl opening is 5in. H by 6in. less than the cabinet’s width). The sink opening is meant to be field trimmable to meet your sink’s cut out spec. (Note: custom sink cut outs are NOT available from the factory. They MUST be field cut by the installer)! The sink opening is trimmable 4.5in. in height and 3in. in width. (Note: when height is changed from standard 34.5in. H, the lower door opening section changes). To accommodate a sink that will not work with these cut out limits, please contact us for a quote on a custom face frame. (IMPORTANT NOTE: sink supports are NOT included with this cabinet)!


Shallow

Base Full Door Cabinet – Wall Depth, Double Doors

Cabinet Code

Sizes

Width: 27in. to 48in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

 Indicate BWD + width + height. (i.e. BWD3034.5 for a 30in. W x 34.5in. H cabinet). If depth other than standard 12.5in. is required, note as special instruction.

Description

Base cabinet, with full doors, and upright center divider. (Note: heights 10in. to 22in. H get no shelves. Heights 22-1/16in. to 28in. H get 1 shelf. Heights 28-1/16in. to 40in. H get 2 shelves. Heights over 40in. H get 3 shelves).

Base Full Door Cabinet – Wall Depth, Butt Doors

Cabinet Code

Sizes

Width: 24in. to 36in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BWD + width + height +BD. (i.e. BWD3034.5BD for a 30in. W x 34.5in. H cabinet). If depth other than standard 12.5in. is required, note as special instruction.

Description

Base cabinet, with Butt doors. (Note: heights 10in. to 22in. H get no shelves. Heights 22-1/16in. to 28in. get 1 shelf. Heights 28-1/16in. to 40in. get 2 shelves. Heights over 40in. get 3 shelves).

Base Full Door Cabinet – Wall Depth, Single Door

Cabinet Code

Sizes

Width: 9in. to 24in. in 1/16in. increments
Height: 31.5in. to 34.5in. in 1/16in. Increments
Depth: 12in., 15in., 18in., 21in., 24in., 27in., and 30in. deep Only. (Note: 12in., 15in., 27in., and 30in. deep available with Blum Tandem soft close drawer glides ONLY).

To Order

Indicate BWD + width + height. (i.e. BWD1834.5 for a 18in. W x 34.5in. H cabinet). If depth other than standard 12.5in. is required, note as special instruction.

Description

Base cabinet, with full door. (Note: heights 10in. to 22in. H get no shelves. Heights 22-1/16in. to 28in. get 1 shelf. Heights 28-1/16in. to 40in. H get 2 shelves. Heights over 40in. H get 3 shelves).