Toe Kick and Fillers

Toe Board Strips – 96″ Plywood

Cabinet Code

TE5003

Sizes

4in. H x 96in. wide only

To Order

N/A

Description

1/2in. x 4 x 96in. loos toe board strips, matching veneer and finished to match when finish is requested. Not available in custom woods. Unfinished edges. Exposed ends must be back-mitered and capped with toe board wedge. Allows seamless toe area when installed after cabinet installation

Slab Filler Strip

Cabinet Code

SLAB FILLER

Sizes

Width: Minimum width of 1.5in., no max within reason

To Order

Indicate SLAB FILLER with your desired width and height

Description

Standard filler strip in any size. If fluting is desired, order as a fluted filler though the custom filler program outlined in our Accessories section. Will NOT include any returns to wall. Only a solid wood filler.

Zero Angled Filler

Cabinet Code

ZERO ANGLED FILLER

Sizes

Face size as measured across the angle is 4-13/16in. wide, fills a 3in. deep x 3in. wide depth transition. No other options for width.

To Order

Indicate ZAF with your desired height, provide fluting option (none, rounded, or tapered)

Description

ZAF is used to transition 3in. step back from one cabinet to another. When turned 90 degrees can also be used so that the plywood side is positioned at a 45 degree angle, allowing easy transitions all the way to the wall. There is no toe kick on the ZAF, so if you need a toe box, simply order the ZAF the height of the cabinet face frame (IE: 30.5in. on a standard base cabinet) and install so it is suspended 4in. off the floor. Units 30-42in. high will have 2in. space above/below flutes (no other options). Units 84-90in. high will have 2in. top spacing and 6in. bottom spacing.


Filler Columns

Wall Filler Column, 3″ & 6″ Wide

Cabinet Code

WFC (CSWFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 3 and 6in. Only

To Order

 Indicate WFC + cabinet width (6in. only) + cabinet height. IE: WFC0642 for a 6 x 42in. high Filler Column. If different than standard 12.5in. depth is required, note as special instruction.

Description

Wall Filler Column box with affixed filler. Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3in. columns have 3 flutes, 6in. columns have 6 flutes.

Base Filler column, 3″ & 6″

Cabinet Code

BFC (CSBFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 3 and 6in. Only

To Order

Indicate BFC + cabinet width (6in. only) + cabinet height. IE: BFC0634.5 for a 6 x 34.5in. high Filler Column. If different than standard 12.5in. depth is required, note as special instruction.

Description

Base Filler Column box with affixed filler. Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3in. columns have 3 flutes, 6in. columns have 6 flutes. Standard toe box pictured. When ordered with flush toe option, there will be a 6in. margin between the floor and the flutes (except on office cabinets where margin is 2in.)

Tall Filler Column, 3″

Cabinet Code

TFC (CSTFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 3 and 6in. Only

To Order

Indicate TFC + cabinet width (6in. only) + cabinet height. IE: TFC0690 for a 6 x 90in. high Filler Column. If different than standard 24in. depth is required, note as special instruction.

Description

Base Filler Column box with affixed filler. Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3in. columns have 3 flutes, 6in. columns have 6 flutes. Standard toe box pictured. When ordered with flush toe option, there will be a 6in. margin between the floor and the flutes.


Refrigerator and Dishwasher End Panels

Refrigerator End Panel

Cabinet Code

REP (CSREP will appear on your quote if your cabinet is not one of our standard sizes – CS = Custom Sized)

Sizes

Width: 5.5 to 30in. in 1/16in. increments

To Order

Indicate REP + width + height. IE: REP2496 for a 24 deep x 96 high end panel. MUST Indicate 1.5 or 3in. filler in special instructions.

Description

Plywood Refrigerator end panel with integrated 1.5 or 3in. solid wood filler facing. Not available fluted. Consider using a fluted filler and loose plywood ordered through our Accessories section. Exposed end and matching interior options are standard. Instead of using refrigerator panels, take a look at our integrated refrigerator cabinets in the Tall Cabinets section. These cabinets incorporate the upper cabinet box in to the side panel(s) for a more built in look with no seams.

Dishwasher End Panel

Cabinet Code

DWEP (CSEP will appear on your quote if your cabinet is not our standard size of 24 x 34.5. CS = Custom Sized)

Sizes

Width: 5.5 to 30in. in 1/16in. increments

To Order

Indicate DWEP + width + height. IE: DWEP2434.5 for a 24 deep x 34.5 high Dish Washer end panel. MUST Indicate 1.5 or 3in. filler in special instructions.

Description

Plywood DW end panel with integrated 1.5 or 3in. solid wood filler facing. Not available fluted. Consider using a fluted filler and loose plywood ordered through our Accessories section. Exposed end and matching interior options are standard.


Appliance Garages

Straight Appliance Garage, 121/2″ Deep x 18″ High

Cabinet Code

AG (CSAG will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 24in. and 30in. Only

To Order

Indicate AG + the cabinet width + cabinet height. IE: AG2418 for a 24in. wide x 18in. high AG. If deeper than standard 12.5in., note as special instruction.

Description

Appliance garage with Tambour roll up door designed for use in straight cabinet runs. Top rail is 3-1/8in.. Hinged door is optional and must be specified. Tambour door not available in custom species.

Corner Appliance Garage

Cabinet Code

CAG

Sizes

Width: 24 and 27in. Only. NOTE: 24in. version has 12.5in. deep sides, 27in. version will have 15.5in. deep.

To Order

Indicate CAG + the cabinet width + cabinet height. IE: CAG2418 for a diagonal appliance garage that is 24in. x 18. Note: BOTH ‘legs’ must be the same (24 or 27)

Description

Appliance garage with Tambour roll up door designed for use under WCS24 or 27 (diagonal wall) cabinet. Top rail is 3-1/8in.. Hinged door is optional and must be specified. Tambour door not available in custom species.


Wine Storage

Wine Storage Unit – Wall

Cabinet Code

WSU (CSWSUW will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 6in. Only

To Order

Indicate WSU + width (6in. only) + height. IE: WSU0642 for a 42in. high Unit. If depth is different than standard 12.5in., note as special instruction.

Description

Wine cubby for wall cabinets (standard 30,36 or 42in. heights only). Plywood construction with banded edges. Dowel assembly. 30in. has 5 openings, 36in. has 6 openings and 42in. has 7 openings. Finished ends and matching interior are standard. Not available in custom species.

Wine Storage Unit – Base

Cabinet Code

WSUD (CSWSUD will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

Sizes

Width: 6in. Only

To Order

Indicate WSU + width (6in. only) + height. IE: WSU0642 for a 42in. high Unit. If depth is different than standard 24in., note as special instruction.

Description

Wine cubby for Base cabinets. Plywood construction with banded edges. Dowel assembly. Interior is only 12in. to prohibit bottles from sliding back. Exposed ends and matching interior are standard. Not available in custom species.

Wine Lattice Kit for Wall Cabinet

Cabinet Code

WLK

Sizes

30 x 15, 36 x 15, 30 x 18, 36 x 18, 15 x 30, 18 x 30 and 21 x 30 (sizes are W x H) and these are the CABINET sizes the unit goes in. WLK unit does NOT include the Wall cabinet itself, just the grid insert(s)

To Order

Indicate WLK+ width + height. IE: WLK3015 for a WLK kit to fit a 30 x 15 wall cabinet.

Description

Lattice kit for criss-cross wine storage. Kit comes with trim for installing. Be sure to order corresponding cabinet with Matching interior and delete the door/shelves. Available in standard lattice profiles only (rounded edges). Not available in custom species.


Finished Wall Cabinet Bottoms

Finished Wall Cabiet Bottom

Cabinet Code

FINISHED BOTTOM

Sizes

Specify any size of plywood up to 48in. x 96in. and B11 light rail molding (8? sticks)

To Order

Indicate size of plywood sheet(s) and number of pieces of B11 needed

Description

Matching finished plywood bottom panel with light rail to wrap edges.